Tiếng Việt
Chemical bottle identification: RFID label
5-inch touchscreen control panel
Quality standard: CE
Rated voltage: 230 V AC, 50 Hz
Power: 900 W
Dimensions (W × D × H): 376 × 278 × 414 mm
Portable/handheld design
Weight: 10.8 kg
Operation
Operating mode: Continuous operation
Disinfection method: Cold fogging
Droplet size: 20 – 30 µm
Spray rate: 30 – 35 mL/min
Maximum room disinfection volume: 142 m³
Spraying time: 6.9 – 8 s/m³
Automatic operating system with countdown timer and automatic shutdown at the end of the program
Noise level: 90 dB (without nozzle)
Disinfectant consumption
Consumption depends on the selected treatment mode. Recommended modes:
Mode 1 – Continuous treatment after each surgery session: 1–2 mL/m³
Mode 2 – Daily preventive treatment: 2–3 mL/m³
Mode 3 – Corrective treatment for severe contamination: 5–7 mL/m³
Microbiological efficacy (validated)
Bacteria: ≥ 5-log reduction
Yeasts & molds, viruses, mycobacteria: ≥ 4-log reduction
Bacterial spores: ≥ 3-log reduction
Efficacy has been clinically validated.
Spraying modes
Preset mode: Users can select saved spraying parameters to apply the appropriate program.
Manual setting mode: Users can set the spray volume via the display for the device to start spraying.
Key features
Fast and effective room disinfection technology
High-quality device with long service life
Ergonomic and environmentally friendly design
User-friendly interface with pre-programmed protocols
Easy operation with touchscreen control
Applications
Huwa-San Fogger is used for airborne surface disinfection of rooms and non-invasive medical equipment, automatically dispersing dry fog through the air to disinfect all exposed surfaces.
Suitable for use in operating rooms, intensive care units (ICU), emergency equipment, portable medical devices, ambulances, etc
